Tube stereo power amplifier.
MSRP (US new retail)
|Power output||35 watts per channel minimum continuous (both channels
operating) at 16 ohms from 25Hz to 20kHz with less than 1% total
Typically approximately .06% at 30 watts @lkHz.
Approximate actual power available per channel at "clipping" (Both CH. OP, 1kHz): 42 Watts
|Power bandwidth||(-3dB points) 12Hz to 54kHz|
|Input sensitivity||.75V RMS for rated output|
|Input impedance||75K ohms, nominal at maximum gain|
|Output regulation||Approximately .6dB, 16 ohm load to open circuit|
|Overall negative feedback||19. 5dB|
|Damping factor||Approximately 15|
|Distortion||Intermodulation distortion: Less than .5% at 1dB below rated output (64V p to p, 16 ohms) (SMPTE method)|
|Slew rate||8 V/µs|
|Rise time||5 µs|
|Hum & noise||1Hz-30kHz, unweighted, rnore than 90dB below rated output.
Line components, more than 85dB below rated output.
|Power supply energy storage||100 joules|
|Power requirements||105-125VAC 60Hz (210-250VAC 50Hz) 300 watts maximum.
150 watts at "idle".
230 watts at rated power.
|Tube complement||(4)12AX7, (2) 6FQ7, (2 matched pairs) 5881, (1) 12AT7, (1) 12BH7|
|Dimensions||19" (48cm) W (standard rack panel) x 7" (18 cm) H x 16.5" (42 cm) D (front panel back). Handles extend 1 5/8" (4.1 cm) forward of front panel|
|Weight||44 lbs. (20 kg) Net, 56 lbs. (25.5 kg) Shipping|